Conferencing Calls; To Create A Conference Call; Ending Calls - Aastra 9112i User Manual

the receiving party, you can either
complete the transfer or cancel the
transfer to go back to the original call.
To transfer a call to another extension:
1. Connect to the call you wish to
transfer (if not already connected).
2. Press k . You will hear a dial
tone as a second line opens up.
3. Enter the extension number of the
person you wish to transfer the call
to, or dial the outside number of the
person you wish to transfer the call
to.
4. To complete a "blind" transfer, press
k again before the phone
begins dialing. To complete a
consultive transfer, remain on the
line to speak with the party before
pressing k again. To cancel
the transfer, select Cancel on the
display screen.
5. To go back to the original call, press
o. Pressing o will alternate
between the two active calls.
10

Conferencing Calls

The 9112i phone system supports up
to 3 parties (including yourself) in a
conference call.

To create a conference call

1. Connect to the first party you wish
to include in the conference (if not
already connected).
2. Press l. The phone places the
current call on hold and opens a
new line.
2
3. Enter the extension number, or dial
the outside number of the person
you wish to add to the conference.
4. If there is no answer, or if you press
o, the call is dropped and the
original call is re-activated.
5. If the second party answers, you
may speak to the person and use the
o button to toggle between calls.
Pressing l again will
complete the conference.
You can use V W to scroll through
and see the numbers and names (if
available) of the parties in the
conference call.
NOTE: When a name is displayed, press-
ing U drops the displayed party
from the call.

Ending Calls

To end a call, you first need to
reconnect to the call if not already
connected (for example, if your caller
is on hold). Press Nto end the call.
If connected through the handset, you
can also place the handset back on
hook to end the call.
Model 9112i SIP User Guide
=Dial