Glass Frame Removal And Installation - Travis Industries DVS GSR NB Insert Owner's Manual

Direct vent fireplace insert
Table of Contents

Advertisement

22

Glass Frame Removal and Installation

Warning:
The appliance must be completely cool before removing the glass.
Warning:
Do not strike or slam the glass.
Open the four latches holding the glass
a
frame in place (start with the two below
the glass) - follow the directions shown
to the right.
Glass Frame
Lift the glass frame up
b
and pull it forward to
remove. NOTE:
You may need to lift the
glass frame while re-
attaching.
Re-Attaching the Glass Frame:
a) Hang the glass frame on the firebox.
b) While holding in place, attach the upper latches
(follow the instructions to the right in reverse).
c) Lift the glass frame slightly and attach the lower latches.
© Travis Industries
Finalizing the Installation
NOTE:
Replace the cove
covers for those faces
using them.
4120228
Top of
Firebox
Glass
Latch
Push in on
the latch.
Twist 1/4 turn.
The latch will then
disengage from the
latch bracket.
100-01285_000

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvs gsr nb

Table of Contents