Sales Demo Mode - GE DPVH880EJ Technical Service Manual

Sales Demo Mode

This mode allows the user to view a dryer cycle.
When in the sales mode, it will not operate through
normal cycles, but will simulate those cycles
electronically on the display.
TO ENTER DEMO MODE:
1. Unplug dryer. Reconnect power.
2. Within 30 seconds of plugging unit in, open
door and press START/PAUSE 4 times within 3
seconds.
3. DEMO MODE ENTRY
Once in Demo mode, if there are no key presses, the
display will begin to scroll "DEMO MODE – TRY ME".
TO EXIT DEMO MODE:
1. Unplug dryer. Reconnect power.
2. Within 30 seconds of plugging unit in, open
door and press START/PAUSE 4 times within 3
seconds.
3. DEMO MODE EXIT will appear on display.
Settings
Under the SETTINGS option, you can
adjust the volume or the brightness of
the display.
VOLUME
■ End of Cycle (signal) volume can be set
from HIGH, MED, LOW or OFF.
■ Control Sounds volume can be set from
HIGH, MED, LOW or OFF.
will appear on display.
DISPLAY BRIGHTNESS can be set from
HIGH, MED or LOW.
After you have made your selection,
press enter.
– 11 –