GE DPVH880EJ Technical Service Manual page 17

7. Lay the chrome cover down on a soft, protected,
fl at surface so the inner part faces upward
(resting on the handle side).
8. Disassemble the door cap from the chrome
cover on the handle side by removing 2 (#8 x
0.625-in.) tapping screws.
9. Disassemble the inner handle from the outer
handle by removing 3 (#8 x 06.25-in.) tapping
screws. Disassemble the outer handle from the
chrome cover by removing 4 (#8 x 0.625-in.)
tapping screws.
Remove
4 screws
(outer
handle)
10. Pop the 2 handle caps out toward you and
reassemble on the opposite side of the chrome
cover, where you removed the outer handle.
2 screws
Door
cap
11. Assemble the outer handle onto the opposite
side of the chrome cover, using 4 (#8 x 0.625-in.)
tapping screws. Reassemble the inner handle to
the outer handle, using 3 (#8 a 0.625-in.) tapping
screws.
3 screws
(inner
handle)
3 screws
(inner
handle)
– 17 –
Handle caps
Replace
4 screws
(outer
handle)
(Continued Next Page)