Setting The Temperatures For Heating And Cooling - Carrier Comfort Touch-n-Go Owner's Manual

QUICK START

Setting the temperatures for heating and cooling

Your thermostat is installed with pre−set heating and cooling temperature settings.
You can use these or change them so your home is as warm or as cool as you'd like
it to be. These steps will hold the temperature where you set it. For the temperature
to change automatically according to your lifestyle needs – whether you're home,
away or asleep – you'll need to follow the Touch 'N' Go instructions on pages 13 –
19.
1. Open the door.
2. Press the up or down button located on the right side of
the display. You will see the preset temperature settings
for heating and cooling. The word heat will flash.
3. Press the up or down button to change the heat setting.
Stop on the correct setting.
4. Press the hold/run button.
9