Connecting The Power Supply - Brother QL-650TD User Manual

5 Connecting the power supply

1
Insert the power cord into the power
cord slot on the rear side of the
printer.
2
Plug the power cord into an electrical outlet.
•
Check that the electrical outlet is 120VAC before
plugging the power cord.
•
Unplug the power cord from the electrical outlet after
you have finished using the QL-650TD.
•
Do not pull the power cord when unplugging it from
the electrical outlet. The wire in the power cord may
become damaged.
•
Do not connect the QL-650TD to the computer until directed to do so when
installing the printer driver. For how to install the printer driver and software,
refer to "Software installation Guide".
25
STEP
Power cord Slot
1
Power cord
STEP
2
STEP
3