Brother QL-650TD User Manual page 11

Cutter
Do not touch the blade of the cutter.
Follow these guidelines to avoid fire, electric shock, or other damage.
Installation/Storage
Put the machine on a flat, stable surface
such as a desk.
DK Roll (DK Label, DK Tape)
Be careful not to drop the DK Roll.
DK Rolls use thermal paper and thermal
film. Both the label and print will fade
with sunlight and heat. Do not use DK
Rolls for outdoor use that requires
durability.
Follow these guidelines to avoid liquid leakage, heat, rupture of the battery.
Battery
Do not insert the battery with the
opposite pole direction to the instruction.
Remove the battery from the printer
immediately at the end of its duration.
Do not solder the battery directly.
WARNING
Do not open the top cover when the
cutter is operating.
CAUTION
Do not put any heavy objects on top of
the machine.
Depending on the area, material, and
environmental conditions, the label may
unpeel or become irremovable, the color
of the label may change or be
transferred to other objects.
Before applying the label, check the
environmental condition and the
material. Test the label by affixing a
small piece of it to an inconspicuous
area of the intended surface.
Do not use, expose, or keep the battery
under the direct sunlight or to extremely
high temperatures and humidity.
Do not wet the battery with water.
Do not drop or throw the battery to
damage it.
Do not affect ultrasound vibration to the
battery. The internal shorts may be
occurred inside of the battery.
11
STEP
1
STEP
2
STEP
3