Label Outlet Maintenance - Brother QL-650TD User Manual

4
Insert the edge
the cutter.
•
Insert the sheet without removing the
•
Check that the printing surface of cleaning sheet is facing upward.
5
After inserting the cleaning sheet into the slot,
push down the roll release lever and remove
the part of cleaning sheet.
B
6
Close the DK Roll cover and turn ON the power.
7
Press the Feed button for more than one
second.
The roller spins by 4" (10 cm).
The adhesive face of cleaning sheet removes the stain
or dust on the roller.
•
If not pressing the Feed button for more than one
second, the roller spins only 1/3" (8 mm).
•
Dispose the cleaning sheet after use.

Label outlet maintenance

If glue accumulates on the label outlet
and the machine becomes jammed,
disconnect the power plug from the
electrical outlet and clean the label
outlet with a cloth dipped in isopropyl
alcohol.
It is recommended to clean the label
outlet when replacing the cutter unit.
of cleaning sheet into slot until it is just in front of
A
part of sheet.
A
Feed button
43
STEP
1
STEP
2
STEP
3
Label outlet