Table of Contents
Advertisement
a)
DISCONNECT THE UNIT FROM
POWER
b) Close the inlet valve (if fitted) and outlet valve.
c) Wait for the moment when the pump casing is
cooled and at ambient temperature.
d)
DRAIN PUMP
e) Dismantle inlet and outlet pipeworks as well as all
pipeworks.
f)
REMOVE PUMP TAKING INTO
ACCOUNT SAFETY (§ 1) AND HANDLING
(§ 2.2) PROCEDURES.
ANY DISASSEMBLY, REPAIR OR
REASSEMBLY WILL BE CARRIED OUT UNDER
FLOWSERVE' RESPONSABILITY, EITHER
DIRECTLY BY THE AFTER-SALES SERVICE OR
BY OTHER FLOWSERVE-AGENTS WHO WILL
GET THE REQUIRED INSTRUCTIONS AND
APPROVALS. THIS IS THE CASE OF
AUTHORIZED REPAIRERS WHOSE ADDRESSES
AND TELEPHONE NUMBERS WILL BE GIVEN ON
REQUEST.
Page 26 of 32
FM USER INSTRUCTIONS ENGLISH 71576526 - 03/07
flowserve.com
Advertisement
Table of Contents
