Removing A Radius Server; Radius Server Information Dialog-Remove Server Tab Page - HP SAN Switch User Manual

Removing a RADIUS server

Removing a RADIUS server, disables the remote authentication of devices or users over the network.
Figure 23
RADIUS Server Information dialog—Remove Server tab page
To remove a RADIUS server:
1. Select Switch > Radius Servers in the faceplate display.
2. Click the Remove Server tab in the Radius Server Information dialog shown in
3.
Select the server to be removed in server list at the top of the dialog.
4. Click Remove Server to remove the server.
5. Click Close to close the Radius Server Information dialog.
56
Figure 23.