HP SAN Switch User Manual page 90

Table 18
Port statistics data window entries (Continued)
Entry
LIP(f7,f7)
LIP(f8,AL_PS)
LIP(f8,f7)
Login Count
Logout Count
Loop Timeouts
Loss Of Sync
Primitive Sequence Errors
Rx Link Resets
Rx Offline Sequences
Total Errors
Total Link Resets
Total LIPs Received
Total LIPs Transmitted
Tx Offline Sequences
Total Rx Frames
Total Rx Words
Total Tx Frames
Total Tx Words
Tx Link Resets
TotalTXErrors
TotalRXErrors
Total Offline Sequences
90
Description
A loop initialization primitive frame used to acquire an AL_PA.
This LIP denotes a loop failure detected by the L_port identified by
AL_PS.
A loop initialization primitive frame used to indicate that a Loop
Failure has been detected at its receiver and does not have a valid
AL_PA.
Number of device logins that have occurred on the switch.
Number of device logouts that have occurred on the switch.
Number of loop timeouts.
Number of synchronization losses (>100 ms) detected by this port. A
loss of synchronization is detected by receipt of an invalid
transmission word.
Number of bad primitives received by the port.
Number of link reset primitives received from an attached device.
Number of offline sequence primitives received by the port.
Total number of primitive and non-primitive port link errors.
Number of link-reset primitives transmitted and received by the port.
Number of loop initialization primitive frames received.
Number of loop initialization primitive frames transmitted.
Number of offline primitives transmitted by the port.
Total number of frames received by the port.
Total number of words received by the port.
Total number of frames transmitted by the port.
Total number of words transmitted by the port.
Number of link reset primitives sent from this port to an attached port.
Total number of errors transmitted by the port.
Total number of errors received by the port.
Total number of offline sequences transmitted and received by the
port.