Installation Of Block-Shaped Sensor Unit; Concealed Mounting - HIKVISION UD.6L0201B1295A01 Quick Operation Manual

Network Convert Camera·Quick Operation Guide
If you already had a standard rail installed, you can buckle the main
unit onto the installed rail directly. As shown in figure below.
Figure 2-3 Buckle the Main Unit onto Standard Rail

Installation of Block-Shaped Sensor Unit

2.1
This series of camera support concealed mounting and exposed
mounting with a decorative cover.

2.1.1 Concealed Mounting

Please make sure that the mounting surface is suitable for adhesive
pasting.
Steps:
1. Drill on the mounting surface. As shown in figure below.
15