Table of Contents
Advertisement
! F6 SET:
Pressing [F6] brings up the OSD configuration menu. To change a setting:
a) Move the highlight bar to the choice you want, then press [Enter].
b) On the submenu that appears, move the highlight bar to the
choice you want and press [Enter].
An icon of a pointing finger indicates which choice is the currently se-
lected one. An explanation of the choices is given in the table below:
Setting
PORT DISPLAY
MODE
PORT DISPLAY
DURATION
PORT DISPLAY
POSITION
SCAN DURATION
PASSWORD
CS-1004 / CS-1008 / CS-1016 User Manual
Function
Selects how the Port ID is displayed: the Port Number plus
the Name (PN + NAME); the Port Number alone (PN); or
the Name alone (NAME).
Determines how long a Port ID displays on the monitor after
a port change has taken place: 3 Seconds; or Always On.
Allows you to position where the Port ID appears on the
screen. Use the Arrow Keys, Pg Up, Pg Dn, 5 (on the
numeric keypad with Num Lock off) or the Mouse to position
the Port ID display, then press [Enter] to lock the position
and return to the Set submenu.
Determines how long the display dwells on each port as it
cycles through the selected ports in Quick View Scan Mode.
The options are: 3, 5, 10, 15, 20, 30, 40, and 60 seconds.
This function is used to set passwords:
1. Move the highlight bar to User or Administrator, then
press [Enter]. You are presented with a screen that allows
you to key in your password. The password may be up to 8
characters long, and can consist of any combination of
letters and numbers (A - Z, 0 - 9).
2. Key in the new password, then press [Enter].You are
asked to key the password in again, in order to confirm that it
is correct.
3.
Key in the new password again, then press [Enter].If the
two entries match, the new password is accepted. If the
entries do not match, you must start again from the
beginning.To modify or delete a previous password, use the
backspace key to erase individual letters or numbers.
Allows you to set a password in order to control access to:
Clearing the Name List; Restoring Default Values; and
Locking/Unlocking the Console. See the OSD Security
Features section, below, for password setting details.
2001-06-9
19
Advertisement
Table of Contents
