VGA
MONITOR
6. Connect the computers to the ports with the cable sets described in
the Cables section on page 4, and power up. When powering up,
you must follow these two basic rules:
a) Turn on the power to a child Master View Station before turning
on the power to its parent (i.e., start with the last unit in the chain
and work back to the First Station).
b) Turn on the power to all the Master View Stations before turning
on the power to any of the computers.
Note: The Power On sequence requires that all Second Stage units
be powered on first. After all the Second Stage units have
been powered on, then the First Stage unit must be powered
on next. After the Second and First stage units have been
powered on, the computers can be powered on.
10
PS/2 MOUSE
PS/2 KEYBOARD
CS-1004 / CS-1008 / CS-1016 User Manual
2001-06-9