ATEN Master View CS-1004 User Manual page 12

4. Plug the power adapter into an AC source; plug the power adapter
cable into the Master View's Power Jack.
5. Turn on the power to the Master View. When you turn the unit On, it
undergoes a Power On Self Test. If there is a problem, Port LEDs 1 -
4 flash repeatedly according to a pattern that indicates what the
problem is:
Pattern
LEDs 1 - 4 Flash Simultaneously
LEDs 1 - 4 Flash One After the Other
LEDs 1 + 2, and LEDs 3 + 4 Alternately
Light and Go Off
If any of these problems occur, turn the Switch Off, then turn it On
again.
1. Turn on the power to the computers.
Note: You must turn on the power to the Master View before turning
on the power to the computers.
PS/2 KEYBOARD
PORT
PS/2 MOUSE
VGA MONITOR
DIP Switch
Power Adapter
8
Internal RAM Memory Error
External RAM Memory Error
ROM Test Error
PS/2
MOUSE
PORT
PS/2 KEYBOARD
CS-1004 / CS-1008 / CS-1016 User Manual
Indication
VGA MONITOR
PORT
2001-06-9