Connector Positions - Delta Energy Systems SOLIVIA Gateway M1 G2 Operation And Installation Manual

Delta solivia gateway m1 g2 - operation and installation manual
Hide thumbs Also See for SOLIVIA Gateway M1 G2:
Table of Contents

Advertisement

Please check the SOLIVIA solar inverter manual for instructions on how to select
the inverter ID.
The gateway must have an AC power outlet within 2 meters of the gateway.
NOTICE
Please make sure, that DHCP is activated at your router, so that the IP address of
your gateway is automatically found. If DHCP is disabled at your router the gateway
uses the default IP configuration. For further information, please refer to Chapter 10.3
6

Connector Positions

RESET
RS485
CONNECTOr NAME
RESET
RS485
EXT. CONTROL
LAN
INPUT 5V
Operation and installation manual SOLIVIA Gateway M1 G2
STATUS
GW
EXT. CONTROL
1 2 3 4 5 6 7 8 A B
dESCrIPTION
For detailed information, please refer to Chapter 7.8
Connection of your SOLIVIA inverter with the
SOLIVIA gateway.
Ripple control receivers control the power management (power
limitation) and the power factor (cos ϕ).
Connection of your SOLIVIA gateway with an internet connected
network point.
Gateway power supply connector.
Status LED
LAN
INPUT
5V
EN
7

Advertisement

Table of Contents
loading

Table of Contents