Scope Of Delivery; Planning; Items / Tools Required For Installation; Further Requirements - Delta Energy Systems SOLIVIA Gateway M1 G2 Operation And Installation Manual

4

Scope of delivery

• SOLIVIA Gateway M1 G2
• AC power plug (3 adapters for usage in different countries)
• Operation and installation manual
• Label
5

Planning

5.1

Items / Tools required for Installation

Following items and tools are required for installation but are not included to the
SOLIVIA gateway box. Please make sure to have them available before starting instal-
lation.
• 1 standard twisted pair Ethernet cable
NOTICE
The Ethernet cable should meet or exceed the standard CAT5 and should not exceed
a length of 100 m. These standard twisted pair Ethernet cable can be purchased for
your installation at many electronics and office supply retailers. The gateway requires
a shielded cable STP, FTP, S/FTP or S/STP.
• 1 RS485 communication interface cable
NOTICE
The RS485 cable should meet the protection class IP65. We recommend using the
RS485 cable from Harting
exceed 1200 m if Baud rate is 19200 (default value). The required cable quality is the
same as for the Ethernet connection: at least shielded (STP, FTP, S/FTP or S/STP)
CAT5 cable or better.
• 2 screws are required to mount the gateway directly to the wall:
Nominal diameter: 4 mm
»
Maximum head diameter: 9 mm
»
Maximum height of head: 3 mm
»
• Screwdriver (if gateway should be mounted to the wall); size of the screwdriver
depends on used screws
5.2

Further requirements

NOTICE
The SOLIVIA gateway must be installed only indoors according to protection class
IP20.
If more than one SOLIVIA solar inverter will be connected in a chain, ensure that
each inverter has a unique ID assigned in the solar inverter user interface.
6
(Part Number: 09 45 145 1560).
Operation and installation manual SOLIVIA Gateway M1 G2
Cable lengths should not