Power Supplies - HP 3500yl Series Specifications

ProCurve Switch 5400zl/3500yl Series Modules

Power Supplies

ProCurve Switch zl 1500W Power Supply (J8713A)
High-power 1500 W power supply for zl series switches. Supplies 900 W
for PoE power plus 600 W for switch power. 200–240 V only.
Physical characteristics
Dimensions (D x W x H): 15.37 x 18.92 x 12.95 cm
(6.05 x 7.45 x 5.1 in.)
Weight: 3.4 kg (7.5 lb.)
Environment
Operating temperature: 0°C to 55°C (32°F to 131°F)
Operating relative humidity: 15% to 95%, non-condensing
Non-operating/Storage temperature: –40°C to 70°C (–40°F to 158°F)
Non-operating/Storage relative humidity: 15% to 95%, non-condensing
Altitude: up to 3 km (10,000 ft.)
Electrical characteristics
Voltage: 200–240 VAC
Current: 10 A
Frequency: 50/60 Hz
Power consumption: 1800 W
Notes
200–240 V only. Installation of the J8713A reduces the chassis altitude
specification to 3677 m (10,000 ft.).
J8713A supplies 600 W chassis power and 900 W PoE power.
See the Ordering Guide for more details on power supply selection for PoE
power. Units shipped to North America include a NEMA L6-20P twist lock
power cord. Non-locking NEMA 6-20P optionally available—see the
Ordering Guide for more details.
When used in the J8714A power shelf, the following specs apply (at
full load):
• Heat dissipation: 475 kJ/hr (450 BTU/hr) @ 220 V
• Maximum current: 5.1 A @ 220 V
ProCurve 620 Redundant/External Power Supply
NEW
(J8696A)
Provides redundant system power and/or extra PoE power for up to two
switches simultaneously
Ports
2 RPS ports; 195 W available per port
2 EPS ports; 398 W available per port
Physical characteristics
Dimensions (D x W x H): 39.12 x 44.2 x 4.39 cm
(15.4 x 17.4 x 1.73 in.) 1U height
Weight: 6.89 kg (15.2 lb.)
Electrical characteristics
Maximum heat dissipation: 422 kJ/hr (400 BTU/hr) for the actual 620
itself. PoE-powered device heat dissipation assumed to be outside the
620.
Voltage: 100–127 VAC/200–240 VAC
Current: 16 A/8 A
Power consumption: 1440 W
RPS power: 390 W
PoE power: 796 W
RPS: 12 V
PoE: –50 V
Frequency: 50/60 Hz
Note: Above figures are for max. RPS and PoE power being supplied to 2
switches simultaneously. 200–240 V power cords shipped with the 620
have a wall plug rated as close to 13 A as specific country standards
allow.
Notes
The ProCurve 620 supports the ProCurve 2900 series (RPS), 3500yl
series (RPS/PoE), and 6200yl (RPS) switches.
The ProCurve 5400zl switches are not supported.
The ProCurve 620 includes 4 2-meter RPS/EPS cables. These cables can
be used to carry either RPS or PoE power to the switch being powered.
Services for accessories are covered under the product in which they are installed.
ProCurve Switch zl 875W Power Supply (J8712A)
Standard 875 W power supply for zl series switches. Supplies 273 W for
PoE power plus 600 W for switch power.
Physical characteristics
Dimensions (D x W x H): 15.37 x 18.92 x 12.95 cm
(6.05 x 7.45 x 5.1 in.)
Weight: 3.2 kg (7.05 lb.)
Environment
Operating temperature: 0°C to 55°C (32°F to 131°F)
Operating relative humidity: 15% to 95%, non-condensing
Non-operating/Storage temperature: –40°C to 70°C (–40°F to 158°F)
Non-operating/Storage relative humidity: 15% to 95%, non-condensing
Altitude: up to 3 km (10,000 ft.)
Electrical characteristics
Voltage: 100–127 VAC/200–240 VAC
Current: 12 A/5.7 A
Frequency: 50/60 Hz
Power consumption: 1050 W
Notes
J8712A supplies 600 W chassis power and 273 W PoE power.
One J8712A can power the J8697A chassis.
Two J8712A supplies are required to power the J8698A chassis.
See the Ordering Guide for more details on power supply selection for
PoE power.
When used in the J8714A power shelf, the following specs apply (at
full load):
• Heat dissipation: 263 kJ/hr (250 BTU/hr) @ 110 V, 222 kJ/hr
(210 BTU/hr) @ 220 V
• Maximum current: 3.2 A @ 110 V, 1.7 A @ 220 V
ProCurve Switch zl Power Supply Shelf (J8714A)
NEW
A rack-mountable chassis with two slots for Switch zl power supplies to
supply additional PoE power to a zl switch beyond what can be provided by
the switch internal power supplies alone
Ports
2 EPS ports
PoE power available depends on power supplies installed
Physical characteristics
Dimensions (D x W x H): 24.71 x 44.3 x 13.2 cm
(9.73 x 17.44 x 5.2 in.) (3U height)
Weight: 4.2 kg (9.26 lb.) (no power supplies installed)
Environment
Operating temperature: 0°C to 55°C (32°F to 131°F)
Operating relative humidity: 15% to 95% at 40°C (104°F), non-condensing
Non-operating/Storage temperature: –40°C to 70°C (–40°F to 158°F)
Non-operating/Storage relative humidity: 15% to 95% at 40°C (104°F),
non-condensing
Altitude: up to 3 km (10,000 ft.)
Acoustic: power: 52.9 dB, pressure: 42.9 dB
Electrical characteristics
Description: Power draw and heat dissipation for the power shelf are
dependent on the power supplies installed.
Note: For heat dissipation and power requirements of the power shelf, find
and add together these figures for the 1 or 2 power supplies actually
installed.
Notes
The ProCurve Switch zl Power Supply Shelf has two slots for zl power
supplies. It supplies PoE power only to zl switches. For yl switches, see
the ProCurve 620 Redundant/External Power Supply.
Power shelf depth includes 1.9 cm (0.75 in.) due to the power supply
handles.
Power supplies not included.
15