HP 3500yl Series Specifications page 11

ProCurve Switch 5400zl/3500yl Series
Specifications
Ports
Physical characteristics
Dimensions (D x W x H)
Weight
Memory and processor
10G module
Management module
Mounting
Performance
Latency
1000 Mb
10 Gbps
Throughput
Routing/Switching capacity
Switch fabric speed
Routing table size
Environment
Operating temperature
Operating relative humidity
Non-operating/Storage temperature
Non-operating/Storage
relative humidity
Altitude
Acoustic
Electrical characteristics
Description
Maximum heat dissipation
Voltage
Current
Power consumption
Frequency
Notes
Safety
Emissions
Immunity
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency magnetic field
Voltage dips and interruptions
Harmonics
Flicker
ProCurve Switch 3500yl-24G-PWR Intelligent Edge (J8692A)
1 open module slot
20 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE
802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)
Media type: Auto-MDIX
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
1 RS-232C DB-9 console port
4 dual-personality ports—each port can be used as either an RJ-45
10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type
100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) with PoE or
an open mini-GBIC slot (for use with mini-GBIC transceivers)
Supports a maximum of 4 10-GbE ports
39.2 x 44.3 x 4.4 cm (15.43 x 17.44 x 1.73 in.) (1U height)
6.4 kg (14.11 lb.)
ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM
Stackable memory and processor: Freescale PowerPC 8540 @ 666 MHz,
4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
<3.7 µs (FIFO 64-byte packets)
<2.1 µs (FIFO 64-byte packets)
Up to 74 million pps
101 Gbps
115 Gbps
10,000 entries
0° to 55°C (32°F to 131°F); 32°F to 40°C (104°F) when used with
any X2 10-GbE
15% to 95% at 40°C (104°F), non-condensing
–40°C to 70°C (–40°F to 158°F)
15% to 90% at 65°C (149°F), non-condensing
Up to 4.6 km (15,000 ft.)
Power: 52.7 dB; pressure: 44.8 dB
ISO 7779, ISO 9296
The switch automatically adjusts to any voltage between 100–127 and
200–240 volts and either 50 or 60 Hz
706 kJ/hr (670 BTU/hr) (max non-PoE)
991 kJ/hr (940 BTU/hr) (max using PoE)
100–127 VAC/200–240 VAC
10.0 A/5.0 A
723 W
50/60 Hz
Maximum power draw if not using any PoE power is 200 W
(1.8 A @ 110 V, 0.9 A @ 220V); full load switch only heat spec listed
above subtracts heat dissipated in external PoE powered devices.
Heat dissipation does not include heat dissipated by the PoE powered
devices themselves.
CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
EN 55024, CISPR 24
IEC 61000-4-2; 4 kV CD, 8 kV AD
IEC 61000-4-3; 3 V/m
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
IEC 61000-4-5; 1 kV/2 kV AC
IEC 61000-4-6; 3 V
IEC 61000-4-8; 1 A/m, 50 or 60 Hz
IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods
EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3
ProCurve Switch 3500yl-48G-PWR Intelligent Edge (J8693A)
1 open module slot
44 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE
802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)
Media type: Auto-MDIX
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
1 RS-232C DB-9 console port
4 dual-personality ports—each port can be used as either an RJ-45
10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type
100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) with PoE or an
open mini-GBIC slot (for use with mini-GBIC transceivers)
Supports a maximum of 4 10-GbE ports
43.0 x 44.3 x 4.4 cm (16.93 x 17.44 x 1.73 in.) (1U height)
7.3 kg (16.09 lb.)
ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM
Stackable memory and processor: Freescale PowerPC 8540 @ 666 MHz,
4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM
<3.7 µs (FIFO 64-byte packets)
<2.1 µs (FIFO 64-byte packets)
Up to 110 million pps
148 Gbps
173 Gbps
10,000 entries
0° to 55°C (32°F to 131°F); 32°F to 40°C (104°F) when used with
any X2 10-GbE
15% to 95% at 40°C (104°F), non-condensing
–40°C to 70°C (–40°F to 158°F)
15% to 95% at 65°C (149°F), non-condensing
Up to 4.6 km (15,000 ft.)
Power: 55.1 dB; pressure: 45.3 dB
ISO 7779, ISO 9296
The switch automatically adjusts to any voltage between 100–127 and
200–240 volts and either 50 or 60 Hz
854 kJ/hr (810 BTU/hr) (max non-PoE)
1,149 kJ/hr (1,090 BTU/hr) (max using PoE)
100–127 VAC/200–240 VAC
10.0 A/5.0 A
759 W
50/60 Hz
Maximum power draw if not using any PoE power is 200 W
(1.8 A @ 110 V, 0.9 A @ 220V).
Heat dissipation does not include heat dissipated by the PoE powered
devices themselves.
EN 55024, CISPR 24
IEC 61000-4-2; 4 kV CD, 8 kV AD
IEC 61000-4-3; 3 V/m
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
IEC 61000-4-5; 1 kV/2 kV AC
IEC 61000-4-6; 3 V
IEC 61000-4-8; 1 A/m, 50 or 60 Hz
IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods
EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3
11