GE Security Simon XT User Manual page 41

Chapter 4 35
Programming
Voice chime. This option determines what sound the panel makes when a chime sensor is tripped. The
choices are Off (no sound), 1 (sensor name), 2 (chime bell) or 3 (soft chime bell).
To program voice chime, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Siren options, then press Enter.
3. Scroll up/down to Voice chime, then press Enter.
4. The current value of this option now flashes (off, 1, 2, or 3).
5. Scroll up/down to the desired value, then press Enter.
6. Press Status repeatedly to exit.
Status beep volume. This option sets the sound volume of nonalarm beeps. The numerical range is 1 to
10. The default value is 7.
To program status beep volume, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Siren options, then press Enter.
3. Scroll up/down to Status beep vol, then press Enter.
4. The current value of this option now flashes (1 to 10).
5. Scroll up/down to the desired value, then press Enter.
6. Press Status repeatedly to exit.
Speaker volume. This option sets the sound volume of the panel speaker for keypresses and alarm
sounds. The numerical range is 1 to 8. The default value is 8.
To program speaker volume, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Siren options, then press Enter.
3. Scroll up/down to Speaker volume, then press Enter.
4. The current value of this option now flashes (1 to 8).
5. Scroll up/down to the desired value, then press Enter.
6. Press Status repeatedly to exit.