Advertisement
Advertisement
Table of Contents
Related Manuals for Gerni Classic 100.2
Summary of Contents for Gerni Classic 100.2
- Page 1 Classic 100.2 Classic 110.2 User Guide Classic 100.2 Classic 110.2...
-
Page 3: Table Of Contents
If the site of cleaning should take the machine. electric cable is damaged, an action to protect themselves authorized Gerni di stributor from being struck by debris This appliance is not intended should replace it. dislodged during operation. - Page 4 safety only use original spare backfl ow preventer has been 1.0 mm² max. 12.5 m parts from the manufacturer installed, Type BA according 1.5 mm² max. 20 m 2.5 mm² max. 30 m or approved by the manufac- to EN 1717. The backfl ow pre- turer.
-
Page 5: Description
2 Description 2.1 Application This high-pressure washer has Only use the high-pressure been developed for domestic washer for purposes described use within: in this manual. - Car, motorbike, boat, cara- The safety precautions must be van, trailer, patio/drive/fl ags- observed to prevent damage tones, woodwork, brickwork, to the machine, the surface to barbecue, garden furniture,... -
Page 6: Before You Start Using Your Pressure Washer
3 Before you start using your pressure washer 3.1 Mounting of trolley 1. Place the trolley handle on handle (models with trol- the machine. ley handle) 2. Secure the handle by mount- ing the 2 screws. Use the enclosed hexagon key. 3.2 Mounting of quick 1. -
Page 7: Operating Your Pressure Washer
4 Operating your pressure washer 4.1 Connection of high pres- 1. Mount the high pressure sure hose hose on the outlet (3). 4.2 Mounting of spray lance and Click & Clean nozzles 1. Push the spray lance (6) into the spray gun (7) and screw it on. - Page 8 4.3 Water connection An ordinary 1/2" garden hose of IMPORTANT! Only use wa- min. 10 m and max. 25 m will ter without any impurities. If be suitable. there is a risk of running sands in the inlet water (i.e. from NOTE: Connection to the public your own well), an additional mains according to regulations.
-
Page 9: After Using Your Pressure Washer
5 After using your pressure washer 5.1 Storing the washer The machine should be sto- 3. Stop the machine, unplug red in a frost-free room! and wind up hose and cable. 4. Place spray handle, nozzles Pump, hose and accessories and other accessories in the should always be emptied of holders of the machine. -
Page 10: Maintenance
6 Maintenance WARNING! Always discon- Clean the connectors of dust nect the electrical plug from the and sand. socket prior to maintenance or Rinse the detergent spraying cleaning. attachment after use. Clean the nozzles. To ensure a long and problem free working life, please take Any repair should always be the following advice:... - Page 11 6.3 Cleaning of machine The machine should be kept vents clean so as to let cooling air pass freely through the ma- chine vents. 6.4 Greasing of couplings To ensure an easy connec- tion and that o-rings do not dry up, the couplings should be greased regularly.
-
Page 12: Trouble Shooting
No water supply Connect inlet water. Water fi lter blocked Clean the fi lter (see section 6.1) Nozzle blocked Clean the nozzle (see section 6.2) In case problems other than the above occur, please contact your local Gerni distributor. -
Page 13: Further Information
The machine should be for- and tear as well as misuse warded to one of the service are not covered by the centres of the Gerni organisa- gu a ran tee). tion with description/spe ci fi ca- that the directions of this ti on of the fault. -
Page 14: Classic
Anton Sørensen, General Manager of Technical Operations EAPC technical documentation Description of the equipment: High pressure washer Equipment name Gerni Model Classic 100.2 / Classic 110.2 Rated output voltage AC 230 V Rated frequency 50 Hz Measured sound pressure level 78 dB(A) - Page 20 Nilfi sk-Advance Pty LTd 48 Egerton St Silverwater NSW 2128 Phone: 1300 556 710...
Need help?
Do you have a question about the Classic 100.2 and is the answer not in the manual?
Questions and answers