Related Manuals for Gerni Gerni Super 130.2
Summary of Contents for Gerni Gerni Super 130.2
- Page 1 Super 130.2 S Super 130.2 Why compromise Super 140.2 Super 145.2 User Guide Super 130.2 S Super 130.2 Super 140.2 Super 145.2...
-
Page 3: Safety Precautions And Warnings
Index 1 Safety precautions and warnings ..........3 2 Description ................4 3 Before you start using your pressure washer ......5 4 Operating your pressure washer ..........6 5 Fields of application and working methods ......10 6 After using your pressure washer ...........12 7 Maintenance ................13 8 Trouble shooting ..............14 9 Further information ..............15... - Page 4 safety only use original spare If an extension cable is used, Water connection parts from the manufacturer the plug and the socket must be Connection to the public mains or approved by the manufac- waterproof and comply with the according to regulations. turer.
-
Page 5: Before You Start Using Your Pressure Washer
2 Description 2.1 Application This high-pressure washer has vaious cleaning jobs. been developed for domestic use for cleaning: Only use the high-pressure - Car, motorbike, boat, washer for purposes described caravan, trailer, patio/ in this manual. drive/fl ag stones, wood- work, brickwork, barbe- The safety precautions must be... - Page 6 is to be used if the product is used together with a special wall hook for wall storage (not standard 130.2 models). 3.1.2 Super 130.2 S 1. Mount the trolley handle (12) on the machine. Secure the handle by tightening the 4 screws.
-
Page 7: Operating Your Pressure Washer
3.4 Mounting of high Attach the high pressure hose pressure hose (4) to the spray gun (7). Detach the high pressure hose by pressing the button (A). 4 Operating your pressure washer 4.1 Connection of high 1. Mount the high pressure pressure hose (models hose on the outlet (3). - Page 8 Press the button to detach the Click & Clean nozzle. 4.3 Water connection An ordinary 1/2" garden hose of IMPORTANT! Only use wa- min. 10 m and max. 25 m will ter without any impurities. If be suitable. there is a risk of silt, sand or sediment in the inlet water (i.e.
- Page 9 4.5 Start and stop of the ma- The spray lance is affected Do not cover the machine chine (when connected by a thrust during opera- during operation. to a water supply) tion - therefore always hold it fi rmly with both hands. IMPOR- Note: If the ma- TANT: Point the nozzle at the chine is left or...
- Page 10 4.7 Pressure regulation on The pressure can be regulated ® ® the TORNADO PR-nozzle on the TORNADO PR nozzle. High pressure Højtryk Lavtryk Low pressure 4.8 Stationary use If mounting a special wall hook (not standard), the pressure washer can be used as a sta- tionary solution meaning that it can be operated while hanging on the wall.
-
Page 11: Fields Of Application And Working Methods
5 Fields of application and working methods 5.1 General Effi cient high presure cleaning is achieved by following a few guide- lines, combined with your own personal experience of specifi c cleaning tasks. Accessories and detergents, when correctly cho- sen, can increase the effi ciency of your pressure washer. Here is some basic information about cleaning. - Page 12 5.2 Typical fi elds of application Below you will fi nd a description of a lot of cleaning tasks which can be solved by a pressure washer from Gerni in association with accessories and detergents. Task Accessories ‘Click Cleaning method &...
-
Page 13: After Using Your Pressure Washer
6 After using your pressure washer 6.1 Storing the washer The machine should be sto- 3. Stop the machine, unplug red in a frost-free room! and wind up hose and cable. 4. Place spray handle, nozzles Pump, hose and accessories and other accessories in the should always be emptied of holders of the machine. -
Page 14: Maintenance
7 Maintenance WARNING! Always disconnect and sand. Make sure that the electrical plug from the no sand or dirt is blocking socket prior to maintenance or the movement of the button cleaning. on the Click & Clean spray To ensure a long and problem lance. -
Page 15: Troubleshooting
7.4 Greasing of couplings To ensure easy connection and that o-rings do not dry up, the couplings should be greased regularly. 8 Trouble Shooting Please ensure that you check the following before contacting the Gerni service organization: Symptom Cause Recommended action Machine refuses to Machine not plugged in Plug in machine. -
Page 16: Further Information
9 Further information 9.1 Recycling the washer Make the old cleaner unusable tive 2002/96/EC on old electri- immediately. cal and electronic appliances, used electrical goods must 1. Unplug the cleaner and cut be collected separately and the electric cable. recycled ecologically. Do not discard electrical appli- Contact your local authorities or ances with household waste. - Page 17 9.3 Accessories Only use original accessories. Click & Clean Special nozzle for enameled surfaces. Optimal distance: 30 - Car nozzle 50 cm. Click & Clean 90° angled special nozzle for undercarriage and wheel arches. Undershassis Integrated guide shoes. nozzle Click & Clean For cars and other surfaces.
-
Page 18: Eu Declaration Of Conformity
10 EU Declaration of Conformity EU Declaration of Conformity Product: High Pressure Washer Type: Gerni Super 130.2 S, Super 130.2, Super 140.2, Super 140.2 Plus, Super 145.2 Plus Description: 230 V 1~, 50 Hz - IP X5 The design of the unit corre-... - Page 19 Super 130.2 S Super 130.2 Super 140.2 / 140.2 Plus...
- Page 20 NEW ZEALAND: AUSTRALIA: Accent Tools Ltd Nilfi sk-Advance Pty LTd 232 Bush Rd 48 Egerton St Albany Silverwater NSW 2128 Auckland 0632 Phone: 1300 556 710 Phone: 09 968 2610 E-mail: sales@gerni.com.au E-mail: sales@accent-tools.co.nz...