Page 3
Betjeningssvejledning Bruksanvisning Bruksanvisning Operating guide Betreibsanleitung Mode d’emploi Gebruiksaanwijzingen Instrucciones de manejo Instruções para uso...
Page 4
Operation and of Europe’s foremost high service department, whose starting guide ...2 pressure factories. Gerni A/S experience and expertise will Assembling before start . . .2 cover all industries with a be at your disposal.
Page 5
GB-2 OPERATING AND The water supply hose is flushed through before it is STARTING GUIDE connected to the high pres- sure cleaner. Hose diame- Fine Sand Filter ter is minimum 3/4”. 15/17 If you use water containing The water supply pressure fine sand we recommend that must not exceed 10 bar 2.19...
O-ring and Clean the water filter (2.4) as ner in a room free of frost. If level" on the oil glass (118 P). press it into the opening of the required. Dismantle the water this is not possible, the high The oil level must only be read Turbo Laser lance.
GB-4 FAULT FINDING Symptoms Cause Corrective action Machine does not start Ignition switch is not “ON”. Turn the switch to "ON". No petrol in the tank. Refill Petrol too old. Replace Petrol cock not in extreme Turn cock to extreme right. right pos.