Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Gerni Classic 115.2
Summary of Contents for Gerni Classic 115.2
- Page 1 Classic 115.2 Why compromise User Guide Classic 115.2...
-
Page 3: Table Of Contents
Gerni distributor. live electrical equipment or the machine itself. Never try to clean clothes or This appliance is not intended Especially check: ... - Page 4 The operator and anyone in It is not allowed to clean The following should be ob- the immediate vicinity of the asbestos- containing surfaces served when connecting the site of cleaning should take with high pressure. high pressure washer to the ...
-
Page 5: Description
2 Description 2.1 Application This high-pressure washer has washer for purposes described been developed for domestic in this manual. use for cleaning: The safety precautions must be - Car, motorbike, boat, cara- observed to prevent damage van, trailer, patio/drive/fl ags- to the machine, the surface to tones, woodwork, brickwork, be cleaned or severe personal... -
Page 6: Before You Start Using Your Pressure Washer
3 Before you start using your pressure washer 3.1 Mounting of trolley 1. Place the trolley handle on handle the machine. 2. Secure the handle by mount- ing the 2 screws. Use the enclosed hexagon key. 3.2 Mounting of quick 1. -
Page 7: Operating Your Pressure Washer
4 Operating your pressure washer 4.1 Connection of high pres- 1. Mount the high pressure sure hose hose on the outlet (3). 4.2 Mounting of spray lance and Click & Clean nozzles 1. Push the spray lance (6) into the spray gun (7) and twist it until the bayonet coupling locks into position. - Page 8 4.3 Water connection An ordinary 1/2" garden hose of IMPORTANT! Only use wa- min. 10 m and max. 25 m will ter without any impurities. If be suitable. there is a risk of silt, sand or sediment in the inlet water (i.e. NOTE: Connection to the public from your own well), an addi- mains according to regulations.
- Page 9 4.5 Start the machine (when The washer can draw water avoid water spillage, crimp connected to open contai- from a rain water tank or bucket the water inlet hose down in ners (suction mode)) as an example. The hose for the the water and then connect water supply must not be too the hose to the machine with...
-
Page 10: Fields Of Application And Working Methods
5 Fields of application and working methods 5.1 General Effi cient high presure cleaning is achieved by following a few guide- lines, combined with your own personal experience of specifi c cleaning tasks. Accessories and detergents, when correctly cho- sen, can increase the effi ciency of your pressure washer. Here is some basic information about cleaning. - Page 11 5.2 Typical fi elds of application Below you will fi nd a description of a lot of cleaning tasks which can be solved by a pressure washer from Gerni in association with accessories and detergents. Task Accessories Cleaning method ‘Click & Clean’...
-
Page 12: After Using Your Pressure Washer
6 After using your pressure washer 6.1 Storing the washer The machine should be sto- 3. Stop the machine, unplug red in a frost-free room! and wind up hose and cable. 4. Place spray handle, nozzles Pump, hose and accessories and other accessories in the should always be emptied of holders of the machine. -
Page 13: Maintenance
7 Maintenance Clean the connectors of dust WARNING! Always discon- nect the electrical plug from the and sand. Rinse the detergent spraying socket prior to maintenance or cleaning. attachment after use. Clean the nozzles. To ensure a long and problem free working life, please take Any repair should always be the following advice:... -
Page 14: Trouble Shooting
To ensure easy connection and that o-rings do not dry up, the couplings should be greased regularly. 8 Trouble-shooting Pleasea ensure that you, you should check the following before contacting the Gerni service organiza- tion: Symptom Cause Recommended action Machine refuses to start Machine not plugged in Plug in machine. -
Page 15: Further Information
that the high pressure wash- centres of the Gerni organisa- tion. Find your local service er has not been used for agent here: rental nor used com mer cial ly http://www.gerni.com.au/. - Page 16 Repairs not covered by the Please phone 1300 733 171 guarantee conditions will be (Australia) or 09 9682610 invoiced. (i.e. malfunctions due (NZ) for service or warranty to Causes men ti o ned in sec- assistance only after check- tion Trouble Shooting of the ing possible causes in the instruction manual).
-
Page 17: Technical Data
10 Main Technical Data Type Classic 115.2 Electrical Specification Rated voltage Rated frequency Rated power consumption Current Class I/ Protection class Class I Class II Protection degree IP xx IPX5 Hydraulic specification Rated pressure MPa/bar 8.0/80 Max. pressure MPa/bar 11.5/115... -
Page 18: Ec Declaration
11 Declaration Declaration of Conformity Product: High Pressure Washer Type: Gerni Classic 115.2 Description: 230 V 1~, 50 Hz - IP X5 The design of the unit corre sponds to the follow- EC Machine Directive 2006/42/EC ing pertinent regulations: EC Low-voltage Directive... - Page 19 Se ri al n o ./ W W /Y C la M Pa M Pa T in 8. 0 5 .2 m ax 11 .5 W ei 1 2 8 gh t °C 4 7 0 5. 2 0 9 8 23 0- M ad 24 0V...
- Page 20 NEW ZEALAND: AUSTRALIA: Accent Tools Ltd Nilfi sk-Advance Pty Ltd 232 Bush Rd Unit 1/13 Bessemer Street Albany Blacktown NSW 2148 Auckland 0632 Phone: 1300 556 710 Phone: 09 968 2610 E-mail: sales@gerni.com.au E-mail: sales@accent-tools.co.nz...
Need help?
Do you have a question about the Classic 115.2 and is the answer not in the manual?
Questions and answers