Subscribe to Our Youtube Channel
Related Manuals for Gerni Super 130.2 S
Summary of Contents for Gerni Super 130.2 S
- Page 1 Super 130.2 S Super 130.2 Why compromise Super 140.2 Super 145.2 User Guide Super 130.2 S Super 130.2 Super 140.2 Super 145.2...
-
Page 3: Table Of Contents
The spray power supply before carrying start up your machine and con- lance is affected by a thrust out user maintenance. To ensure the appliance tact your Gerni distributor. of up to 16.4 N during ope- Original instructions... - Page 4 safety only use original spare WARNING! residual current device that parts from the manufacturer Inadequate extension cables will interrupt the supply if the or approved by the manufac- can be dangerous. If an exten- leakage current to earth ex- turer. sion cable is used, it shall be ceeds 30 mA for 30 ms.
-
Page 5: Super
2 Description 2.1 Application This high-pressure washer has vaious cleaning jobs. been developed for domestic use for cleaning: Only use the high-pressure - Car, motorbike, boat, washer for purposes described caravan, trailer, patio/ in this manual. drive/fl ag stones, wood- work, brickwork, barbe- The safety precautions must be cue, garden furniture,... - Page 6 (not standard 130.2 models). 3.1.2 Super 130.2 S 1. Mount the trolley handle (12) on the machine. Secure the handle by tightening the 4 screws.
-
Page 7: Operating Your Pressure Washer
3.4 Mounting of high Attach the high pressure hose pressure hose (4) to the spray gun (7). Detach the high pressure hose by pressing the button (A). 4 Operating your pressure washer 4.1 Connection of high 1. Mount the high pressure pressure hose (models hose on the outlet (3). - Page 8 Press the button to detach the Click & Clean nozzle. 4.3 Water connection An ordinary 1/2" garden hose of IMPORTANT! Only use wa- min. 10 m and max. 25 m will ter without any impurities. If be suitable. there is a risk of silt, sand or sediment in the inlet water (i.e.
- Page 9 4.5 Start and stop of the ma- The spray lance is affected Do not cover the machine chine (when connected by a thrust during opera- during operation. to a water supply) tion - therefore always hold it fi rmly with both hands. IMPOR- Note: If the ma- TANT: Point the nozzle at the chine is left or...
- Page 10 4.7 Pressure regulation on The pressure can be regulated ® ® the TORNADO PR-nozzle on the TORNADO PR nozzle. High pressure Højtryk Lavtryk Low pressure 4.8 Stationary use If mounting a special wall hook (not standard), the pressure washer can be used as a sta- tionary solution meaning that it can be operated while hanging on the wall.
-
Page 11: Fields Of Application And Working Methods
5 Fields of application and working methods 5.1 General Effi cient high presure cleaning is achieved by following a few guide- lines, combined with your own personal experience of specifi c cleaning tasks. Accessories and detergents, when correctly cho- sen, can increase the effi ciency of your pressure washer. Here is some basic information about cleaning. - Page 12 5.2 Typical fi elds of application Below you will fi nd a description of a lot of cleaning tasks which can be solved by a pressure washer from Gerni in association with accessories and detergents. Task Accessories ‘Click Cleaning method &...
-
Page 13: After Using Your Pressure Washer
6 After using your pressure washer 6.1 Storing the washer The machine should be sto- 3. Stop the machine, unplug red in a frost-free room! and wind up hose and cable. 4. Place spray handle, nozzles Pump, hose and accessories and other accessories in the should always be emptied of holders of the machine. -
Page 14: Maintenance
7 Maintenance WARNING! Always disconnect and sand. Make sure that the electrical plug from the no sand or dirt is blocking socket prior to maintenance or the movement of the button cleaning. on the Click & Clean spray To ensure a long and problem lance. -
Page 15: Trouble Shooting
To ensure easy connection and that o-rings do not dry up, the couplings should be greased regularly. 8 Trouble Shooting Please ensure that you check the following before contacting the Gerni service organization: Symptom Cause Recommended action Machine refuses to Machine not plugged in Plug in machine. -
Page 16: Further Information
that the product has not been this warranty will be repaired or replaced by one of the service exposed to abuse such as centres of the Gerni organisa- knocks, bumps or frost. that only water without any tion. Find your local service impurities has been used. - Page 17 that the high pressure wash- Please phone 1300 733 171 er has not been used for (Australia) or 09 9682610 rental nor used com mer cial ly (NZ) for service or war- in any other way. ranty assistance only after checking possible causes Repairs not covered by the in the trouble shooting...
-
Page 18: Technical Data
10 Main Technical Data Type Super 130.2 Super 140.2 Super 145.2 Electrical Specification Rated voltage 230-240 230-240 230-240 Rated frequency Rated power consumption Current Class I/ Protection class Class I Class I Class I Class II Protection degree IP XX IPX5 IPX5 IPX5... -
Page 19: Declaration Of Conformity
Declaration of Conformity Product: High Pressure Washer 130.2 S, Super 130.2, Type: Gerni Super Super 140.2, Super 140.2 Plus, Super 145.2 Plus Description: 230-240 V 1~, 50 Hz - IP X5 The design of the unit corre sponds to the follow-... - Page 20 Super 130.2 S Super 130.2 Super 140.2 / 140.2 Plus...
- Page 21 NEW ZEALAND: AUSTRALIA: Accent Tools Ltd Nilfi sk-Advance Pty Ltd 232 Bush Rd Unit 1/13 Bessemer Street Albany Blacktown NSW 2148 Auckland 0632 Phone: 1300 556 710 Phone: 09 968 2610 E-mail: sales@gerni.com.au E-mail: sales@accent-tools.co.nz...
Need help?
Do you have a question about the Super 130.2 S and is the answer not in the manual?
Questions and answers