Technical Specifications - HP Integrity BL870c Quickspecs

QuickSpecs

Technical Specifications

System Unit
SAS RAID LSI 1068
Controller
Dimensions
Shipping Dimensions
Weight
Temperature Range*
Relative Humidity**
*All temperature ratings shown are for sea level. An altitude derating of 1°C per 304.8 m (1.8°F
per 1,000 ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed. Upper operating limit
is 3,048m (10,000 ft) or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or 30.3
KPa/4.4 psia.
**Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F).
Altitude maximum for storage corresponds to a pressure minimum of 70 KPa.
Disk Drive and
Enclosure Interface
SAS Connectors
Server Interface
SAS Speed
Cache Memory
Logical Drives
Supported
Maximum Logical Drive
Capacity
Host Memory
Addressing
RAID Support
Upgradeable Firmware Upgradeable Firmware
DA - 12926 Worldwide QuickSpecs — Version 1 — 2.11.2008
Height
Depth
Width
Height
Depth
Width
Maximum
Operating
Non-Operating
Storage
Maximum Wet Bulb
Temperature
Operating
Shipping
Storage
3G SAS (Serial Attached SCSI)
1 internal mini-SAS x4 wide port connector
PCI-X 66MHz 64-bit provides 0.5GB/s maximum bandwidth
x4 3G SAS provides 1.2GB/s maximum bandwidth.
No cache memory supported
Up to 32 logical volumes
584GB (4 x 146GB)
64-bit, supporting greater than 4GB server memory space
RAID 1 (Mirroring)
HP Integrity BL870c Server Blade
14.42 in (36.63 cm)
20.05 in (50.93 cm)
4.10 in (10.41 cm)
21.50 in (54.61 cm)
23.13 in (58.75 cm)
9.94 in (25.25 cm)
38 (17 kg)
10° to 35° C (50° to 95° F)
-40° to 60° C (-40° to 140° F)
-20° to 60° C (-4° to 140° F)
30° C (86° F)
10% to 90%
10% to 90%
10% to 95%
Page 26