Pre-Installation - Hunter Ceiling Fans Installation And Operation Manual

Hide thumbs Also See for Ceiling Fans:

Table of Contents

Pre-Installation

Select installation site: Normally this is near the center of the room, often replacing a light fixture.

Make certain that ample clearance is left for the rotating fan blades. For maximum efficiency, no

obstruction (walls, posts, etc.) should be within 30" of the tips of the blades (see Fig. 1).

Your Hunter fan comes with the proper hardware to hang the fan from a 8 foot ceiling so the fan

blades will be 12" from the ceiling and approximately 7 feet from the floor (see Fig. 1).

NOTE: On vaulted ceilings, up to 45° pitch, you may want to use the Hunter Vaulted Ceiling

Mounting Kit. This kit can be purchased via our website or our parts and service number.

CAUTION

NEVER LIFT THE MOTOR BY THE WIRES.

LET MOTOR REST IN THE CARTON LINER FOR PROTECTION.

12" (ref.) Minimum

30" Clearance

7' From Floor

Fig. 1

Hunter Fan Company

41532-01 • 10/14/13

Table of Contents

Original