Chapter-1: Installation; Pre-Installation Tasks; About This Manual; Omnia.11 Components - Omnia .11 Installation And Operation Manual

Chapter-1: Installation

Pre-Installation Tasks

Please take a few minutes to read through this chapter before proceeding with the installation of your new Omnia.11
processor.

About This Manual

The latest version of this manual is always available for download from the Omnia website here:
http://omniaaudio.com/manuals

Omnia.11 Components

By now, you've unpacked the shipping carton to gain access to this manual. Now is the time to inspect the
Omnia.11 unit and its shipping carton for any signs of shipping damage. Such damage must be reported to your
carrier for any claims. The Omnia.11 shipping box includes the following components:
 Omnia.11 processor.
 Omnia.11 Operating Manual.
 Warranty Registration Card. (Please complete the form and return/FAX it to Telos/Omnia)
 Two IEC Power Cords, one of the USA/Canada style, and one of the Euro style.

Processor Location

We strongly suggest using the Omnia.11's built-in MPX stereo generator (the BNC Composite outputs) for the
analog FM channel if at all possible in your system. This will generally result in the best, most tightly controlled
modulation performance. Plus you'll be able to make use of the advantages available only in the Omnia.11 such as
the SSB option, superb pilot and SCA protection performance, composite clipping etc. Remember, analog FM is still
analog after all! Using an AES/EBU digital path to a digital exciter can be more convenient and can work well, but
it simply moves the location of the stereo generator D/A conversion to the digital exciter over a third-party path
which is not likely to have the above advantages or optimized performance of the integrated stereo generator in the
Omnia. Sometimes, these exciters also have limiters or clippers built-in to their AES inputs that can actually add
overshoot and distortion to the signal!

AC Power Environment

The Omnia.11 subsystem is a DSP-based microcomputer, and therefore requires reasonably clean AC power, just as
any modern computer system does. And even though the Omnia.11 power supply is equipped with robust AC
transient suppression, we recommend that an "online" style (non-switching type) Uninterruptible Power Supply
(UPS) with transient surge suppression be employed.
At transmitter sites there can be heavy transients on the power lines as well as significant surges introduced into the
power system by frequent lighting strikes. These are unwelcome power line events and can damage even the most
robust equipment. Therefore you should give the AC power environment and installation practices thorough
consideration before plugging in the Omnia.11 (or any other microcomputer-based equipment).
1