Definition Of Static Security Levels; Changing Passwords - Omnia .11 Installation And Operation Manual

Definition of Static Security Levels

There are five different access levels available set with the User Level dropdown:
Access Level Account
Full Access user
IO Edit ioedit
Preset Edit presetedit
Read Only readonly
Preset Select presetselect
All passwords are user configurable from the front panel Setup / Security menu or from the Configuration page on
the remote webpage interface.
Each level is allowed to change its own password, by providing the old password and the new password twice.

Changing Passwords

To change the password, select the desired User Level. The default level is "Full Access" with default password:
"omnia". To change this, enter the existing password into the "Old Password" box, the new password in both the
"New Password" boxes and then touch the "Change Password" button. Be sure to make note of your new
password!
NOTE: This same password is also used for remote control access and can be changed from the remote webpage
interface as well.
Auto Lock when ON will automatically lock the front panel when the screensaver activates. The password will be
required at bootup and whenever exiting screensaver mode.
Lock when touched will lock the front panel immediately, requiring the password to regain access.
Change Level will bring up the unlock keyboard similarly to Lock but will not lock the unit immediately, allowing
you to change the User Level and input the appropriate password for that level. Touch or click Cancel to cancel
without making changes.
Default Description
Password
omnia Same as current (1.2 and below) operating mode. Full access to
all screens and controls.
omniaio Read/write to everything in "Input" and "Output" blocks, and
the entire "Setup" screen. Allows selection, download and
upload of I/O Configs and Presets. Allows bank selection and
update.
omniapreset Read/write to everything in all Processing blocks, and the
"System" block on the "Setup" screen. Allows selection,
download and upload of I/O Configs and Presets. Allows bank
selection and update.
omniaread Read only access to everything. Cannot change anything.
Cannot select, download or upload Presets or I/O Configs.
Cannot select banks or update software.
omniasel Allows selection of presets. Cannot select I/O Configs.
Cannot download or upload Preset or I/O Configs. Cannot
select banks or update software.
19