Linking the Reader
Linking the Reader
Link Datalogic RF Devices to Base
For RF devices, before configuring the interface it is necessary to
link the handheld with the base.
To link the handheld and the base, press the trigger to wake it and
place it on the base. If the reader was previously linked to another
base, you must first scan the Unlink barcode before re-linking to
the new base.
Link Scanner to Bluetooth Adapater
1.
Install any drivers provided with the Bluetooth adapter.
2.
Scan the Enable RF Link to Server label below to make the
scanner visible to the host computer.
3.
Use the host computer's Bluetooth manager to "Discover
new devices" and select "Datalogic Scanner." If you
receive an error message, it may be necessary to disable
security on the device.
4.
Use an RS-232 terminal program to see incoming data
on the port designated by the computer's Bluetooth
manager.
16
Unlink
Enable RF Link to Server
Gryphon™ I GBT4100