Programming Mode - Datalogic Gryphon GBT4100 Quick Reference Manual

INDICATION
Reader
Disabled
Green Spot is on
continuously
a
Green Spot
flashes momen-
tarily

Programming Mode

reader is in Programming Mode.
Label Program-
ming Mode
Entry
Label Program-
ming Mode
Rejection of
Label
Label Program-
ming Mode
Acceptance of
Partial Label
Quick Reference Guide
DESCRIPTION
The reader has
been disabled by
the host.
While in Stand
Mode or Trigger
Stand Mode the
green spot shall
be on while in
stand watch
state.
Upon successful
read of a label,
the software shall
turn the green
spot on for the
time specified by
the configured
value.
- The following indications ONLY occur when the
A valid program-
ming label has
been scanned.
A label has been
rejected.
In cases where
multiple labels
must be scanned
to program one
feature, this indi-
cation acknowl-
edges each
portion as it is
successfully
scanned.
LED
The LED blinks
continuously
N/A
N/A
LED blinks con-
tinuously
N/A
N/A
BEEPER
N/A
N/A
N/A
Reader sounds
four low fre-
quency beeps.
Reader sounds
three times at
lowest fre-
quency and cur-
rent volume.
Reader sounds
one short beep at
highest fre-
quency and cur-
rent volume.
36