Gear Lever Functions - Seat LEON CUP RACER 2011 Technical Manual

TECHNICAL MANUAL LEON CUP RACER
a) FDX view – level cap and seal)
Note:

In case of disassemble the unit from the car, the unit must be positioned in vertical position, as is
shown in the picture, to avoid any oil leakage.
2.7

Gear lever functions

The gear lever, placed on the center tunnel, enables to activate different command modes. The features for
each command mode are:
Gear lever position Mode
P Parking mode
R Reverse
N Neutral
D/S Automatic mode
Tip + / - Manual shifting
Parking mode is a lever position that fixes the transmission trough a mechanical cable. Use only this position
when you want block the car.

pedal is pressed.

might be seriously damaged.

If for any reason the brake signal is not available and
button, sign (P) , on the steering wheel module permit to unlock the gear lever command.

to put on and take out the
brake pedal is pressed.

Remarks
Use to block the car
Safety for team staff when car is stopped
(not allowed on the pits zone)
No gear engaged
D= no racing mode
S= Racing mode / high engine speed shifting / racing
down shift.
Shifting through the gear lever +/- mode or using
steering wheel paddles
or removes the parking mode if the car is completely stopped and the brake
ible move the car to park, etc, pushing externally. (pit lane use)
c) FDX level cap – bottom view-
mode if the car is complete stopped and
, the grey
13 42
de