Brakes - Seat LEON CUP RACER 2011 Technical Manual

TECHNICAL MANUAL LEON CUP RACER
2.8

Brakes

The following table shows the parts features mounted on the LCR.
Brake car features
Front caliper
Front disc
Front pump
Front pads
Rear caliper
Rear disc
Rear pump
Rear pads
Rear press reducer
Brake balance
Notes:

The front calipers are internally different from the AP std parts. Use always spare parts from the SEAT
Leon Cup Racer Parts Catalogue.

The front discs for the SEAT Cup Racer have 11 bracket lengths. Use always spare parts from the SEAT
Leon Cup Racer Parts Catalogue.

The rear caliper pressure is limited. The brake pressure value showed on the dashboard is previous to
the reduction press valve.
Following the brake pump range available.
MASTER CILINDER
AP 15 MM
AP 15.9 MM
AP 16.8 MM
AP 17.8 MM
AP 19,1 MM
AP 20,6 MM
AP 22,2 MM
AP23,8 MM
Brake balance.

It is recommended keep the same pump diameter balance.

The brake balance is mechanic through the remote brake bias adjuster.

Do not press the brake pedal when you are adjusting the brake balance.

percentage. The recommended percentage is 60% front. (car delivery)

Balance value:
FRONT + REAR
Description
AP 6P
362 x 32
AP 17,3 mm
Galfer RX
AP 2P
272x10
AP 22.2 mm
Galfer RW
Single valve 25 bar
Mechanical
Push Rod
PRT 110
PRT 110
PRT 110
PRT 110
PRT 110
PRT 110
PRT 110
PRT 110
FRONT X 100
Remarks
Special: SEAT Sport
Special: SEAT Sport
25 mm
Solid
(nominal)
Remarks
SEA Sport car delivery
SEAT Sport car delivery
the front / rear pressure and the balance
17 42
de