Engine Control & Service - Seat LEON CUP RACER 2011 Technical Manual

TECHNICAL MANUAL LEON CUP RACER
2.2 Engine control & service
Following the more frequent maintenance issues. For more detailed maintenance or parts substitution
information download yourself
Control routine before start to run:

Check the oil level: It has to be at top of the level dipstick indication in cold conditions. It is possible
to fit up to 1mm over the max level.

Check the water level before start.

With the engine running, check there is any oil or water or fuel leakage.

Check the fan functionality. Operating range 92°C to 87°C.

Don not push the engine until the water temperature its upper to 80°C.
Maintenance routine:

Change the engine oil and oil filter in the indicated mileage.

Use always the fluids and spare parts from VW group original parts , detailed on the Leon Cup Racer
parts catalogue

Clean and service the air filter each event. In urban circuits is recommended clean or replace more
frequently.

Check that the alternator belt is clean and there

Often clean the radiator and intercooler panel.

If any doubt, contact to the SEAT Sport service.
Distributial seal view
Parts subject to frequent service:
Engine
Oil drain plug
Oil filter plastic cover
Oil filter
Oil dipstick view.
Turbo charger seal view
Torque
By hand Change the plastic cap (provided with the oil
filter)
50 Nm
<<
www.seat-sport.com .
inside the PoliV.
Remarks
O
8 42
de