Fuel - Seat LEON CUP RACER 2011 Technical Manual

TECHNICAL MANUAL LEON CUP RACER
2.3

Fuel

The fuel tank is coming from series using the standard flow fuel pump and in additional a second flow pump on
the opposite side.
The Leon Cup Racer body shell is ready to add an additional fuel tank. This tank is additional, connected in line
and supplying the fuel to the first one.
Standard Fuel tank features
Fuel tank type
Capacity
Minimum fuel level before engine fault
Additional fuel tank features
Features
Capacity
Notes:

The Quattro version fuel tank permits use a straight exhaust decreasing the fuel temperature for
the exhaust irradiation. Check all tack protections are in good conditions.

After a crash or out track driving check the inner flow fuel pumps fixations.
Fuel tank drain:
Hydraulic: There is a FIA fuel
The pump activation system is connected to the battery directly. For safety, is strongly recommended to
carry out the process with the main switch off.
- View (a) -
Note:

During the drain process is strongly recommended to stop the process at the end. This is for no
damaged fuel pump running without fuel.

On the Leon Cup Racer parts catalogue it is available the extraction kit.

To carry out this procedure is recommended to connect the extraction tool to the battery help
connector on the car.
Standard fuel tank from Quattro version
55 lts Standard tank / *option 60 lt additional fuel tank (LR
version)
> 5 lts.
FT3 FIA Homoogated
60 lt additional fuel tank // possible to reduce the capacity
by adding balls.
main tank by gravity.
- View (b) -
9 42
de