About This Document; Before Reading This Document - Digital Watchdog Stand alone DVMR User Manual

- Input IP Address you already input into DVMR unit(TCP/IP SETUP).
- Input Port number you already input into DVMR unit in PORT.
Just input 8000, which is default port number.
- In some cases, port number 8000 is blocked by firewall, and you have
to input different number like 8090 which is not blocked.
- Input "ADMIN" in ID.
- Input the same password you set into DVMR in PASSWORD. Default password is "1".
- Select type of PTZ camera if you connected PTZ camera to your DVMR unit in the PT TYPE. To control PTZ
camera via IP network, you first input PTZ command for your PTZ camera into our DVMR units, and please refer
to user manual of our DVMR unit for details.
OPTION :
- Select circular monitoring interval ranging from 0.1 sec to 30 sec. The smaller it is, the faster circular
monitoring interval is. The absolute circulation interval is a little
transfer rate of IP network.
- Select scan rate ranging from 1x to 64x. The larger it is, the faster search speed is. The absolute search is a
little different from set value depending on data transfer rate of IP network.
SAVE OPTION :
- SAVE OPTION is to assign folder on which you want to save pictures you will select while you search recorded
pictures, picture by picture or pictures in avi format for time duration you set in Record Duration.
Record duration is available from 3 sec to 1 minute, and we recommend you to set at lower level if specification
of your computer is not latest one to take care of processing capability of your computer. Processing in avi
format give great load on CPU of your computer, and we recommend memory (RAM) of your computer must be
256 MB or more than that to download pictures in avi format.
Record Duration you set in SAVE OPTION is real time, and pictures to be downloaded for Record Duration you
set shall be between 20 sec longer or shorter in practical recording time, depending on data transfer rate via
IP network.
c) Scan. : Press scan button to enter into search window. Using various operation buttons,
you can search recorded pictures, save selected pictures on client PC, or print pictures.
Refer to following paragraph "3. Search recorded pictures over IP network" for details.
⑧ PTZ control : You can control Zoom, Focus, and Pan/Tilt of PTZ camera while you see live pictures via IP
network. Of course, you must input PTZ command for a specific PTZ camera you connected to
your DVMR unit,
into your DVMR unit. When you press corresponding buttons for Pan/Tilt control, press a couple
of second every time you press to take care of data transmission speed through IP network.
Otherwise, there is a possibility that given protocol is transmitted repeatedly, regardless of your
intention.
Notice : From time to time, connection
shall be cut unexpectedly due to conditions
of network line, and you will see disconnect
button(③) is activated. Just press connect
button(②) button again, and you can
continue to see live pictures.
6. Search recorded pictures via
IP network.
2
ALL ABOUT IMAGE RECOGNITION & PROCESSING
7. Manual for Remote
viewer software
different from set value depending on data
7
3
4
6 6
5
37
Before installing stand alone DVMR, be sure to thoroughly review and follow the instructions in this User's
Manual. Pay particular attention to the parts those are marked NOTICE.
Also, when connecting with external application, first turn the power OFF and follow manual instruction for
appropriate installation.
1. This document is intended for both the administrator and users of stand alone DVMR Model.
2. This manual contains information for configuring, managing and using stand alone DVMR Model.
3. To prevent fire or electrical shock, do not expose the product to heat or moisture
4. Be sure to read this manual before using stand alone DVMR Model.
5. For questions and technical assistance of this product, contact your local dealer.
Strong recommendation on installation of the DVMR unit
1. Check electricity at the place you want to install the DVMR unit is stable and meets our electricity
requirements.
Unstable electricity will cause malfunction of the unit or give critical damage to the unit.
2. Several chips on the main board of the DVMR unit and hard disk drive inside the unit generate
1
heat, and it must be properly discharged.
Do not put any objects just beside exhaust port(fan) on the left side of the unit and do not
close up an opening (fresh air in-take) on the right side of the unit..
3. Put the DVMR unit at well-ventilated place and do not put heat-generating objects on the unit.
When it is installed inside 19 inch mounting rack together with other devices, please check built-in
ventilation fan of the rack is properly running.
8
10
9
ALL ABOUT IMAGE RECOGNITION & PROCESSING

1. About this document

2. Before reading this
document
2