Digital Watchdog Stand alone DVMR User Manual page 3

⑨ Command button :
We have 3 different buttons that are, save, print, and event.
a) Save
During searching recorded pictures, you can save pictures one by one in the folder in client PC
by pressing save button. File name automatically designated shall be date and time when selected
picture was recorded.
b) Print
During searching recorded pictures, you can print picture, one by one, you see.
c) Event
Press event button to see alarm list saved in DVMR unit, and you can search recorded
pictures based on event list by clicking any one of list.
d) Record
This button enables you to download pictures while you search recorded pictures for a time uration
(Record Duration) you already set in SYSTEM SETTING. While you search recorded ictures, press
Record button and you can save series of pictures for Record Duration in avi format. If you set Record
Duration at 30 sec, our client program download pictures in avi format for 30 sec and save in the file
name of Year-Month-Day-Hour-Minute-Second, and continue to download and save again after 30
seconds, and so on. Every 30 seconds, it creates file in the name of Year-Month-Day-Hour-Minute-Second
until you press Stop button or Record button again.
Then you can see using Media Player later or you can put those pictures on CD or on other type of storage
media to show somebody who are in other place.
Size of file downloaded for 30 sec, for example, shall be 100MB, more or less, depending on ictures taken,
and we recommend you to download and save on your computer whenever it is necessary, and delete
those files if it is not necessary to save for a long time, to take care of storage space of hard disk drive in
your computer.
⑩ Calendar : You can select date and time to search pictures recorded at selected time
and date. You can refer to start and end of recording in ⑦.
Notice : From time to time, connection shall be cut unexpectedly due to conditions of network line.
Whenever it is cut, quit search window by pressing power switch(①), and then press connect
button in live-view window and scan button to enter into search window again, to continue
searching.
Notice : Compatibility of Remote Viewer Software with different kinds of operating systems and PC
hardware may not be simply specified due to the characteristics of network that it is much
related with not only PC hardware and operating system but also other software installed on the
client PC and conditions of network(internet) line. Basically, Remote Viewer Software is compatible
with typical Windows operating system from Windows 98 to Windows XP.
Notice : To see continuous live view, we recommend not to select motion recording in RECORD SETUP
menu of DVMR. If it is set at motion recording in SETUP menu of DVMR, image transmission is
done only there is motions detected.
Notice : While you search recorded data using client software in client PC, DVMR unit to which you
access via IP network is in playback mode, and no recording is done as far as you search
recorded data. However, while you are in connection with DVMR unit via IP network for live view,
DVMR unit continues to record but at a little lowered recording rate.
Therefore we recommend you to DVMR unit only when it is necessary.
ALL ABOUT IMAGE RECOGNITION & PROCESSING
7. Manual for Remote
viewer software
39
FCC INFORMATION
A CLASS A computing device subject to certification by the Commission shall be identified pursuant to
par.2.925 et Seq of the chapter. In addition, the label shall include the following statement:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received,
including interference that may cause undesired operation.
Where a device is constructed in two or more sections connected by wires and marketed together,
the statement specified in this Section is required to be affixed only to the main control unit.
The users manual or instruction manual for the EUT shall contain the following statement or eqivalent.
Caution : Changes or Modifications not expressly approved by the party responsible for compliance could void
the users authority to operate the equipment.
If the EUT requires accessories such as special shielded cables and/or connectors to enable compliance with
emission limits, the instruction manual for the EUT shall include appropriate instructions on the first page of the
text concerned with the installation of the device that these special accessories must be used with the device.
It is the responsibility of the user to use the needed special accessories supplied with the equipment.
For a CLASS A digital device or peripheral, the instructions furnished the user shall include the following or
similar statement placed in a prominent location in the text of the manual.
Note : This equipment has been tested and found to comply with the limits for a CLASS a digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of the this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
ALL ABOUT IMAGE RECOGNITION & PROCESSING