Snmp Management - AD-net Technology AN-TDM-IP-1E1/2E1-A User Manual

Manuel de l'usager du Mux IP vers 2xE1
Parameters
Encapsul
ation
Frame
Size
Advanced
RTP
TTL/TOS
Supplementary item:
Whether E1 bandwidth is auto-adaption depends on whether enable this E1.
Suggestion: If this E1 is not used, it is better to let this E1 channel disabled.

5.6 SNMP Management

SNMP
Configuration
Information
AD-net Technology., CO LTD
Selections
IP Encapsulation
IPv4_UDP
Every Ethernet packet encapsulation length can
1×128
select 1×128/2×128 字节/4×128 byte. The
byte
longer the packet is, the more E1 data
2×128
encapsulated in the packet, the lower expense
byte
ratio is, the higher bandwidth efficiency is and
4×128
the bigger time delay is. Vise versa.
byte
Default: 2
Real-time Transport Protocol, used to define E1
Enable
Stamp.
Disable
Default: Enable
TTL: Time To Live, Default: 128
TOS: Type Of Service, Default: 184
Fig 5.6-1 SNMP management
Table 5.6-2 SNMP management parameters
Parameters
SNMP Read
Community
www.hypercable.fr
Explanations
time
Option Explanations
Read commands of device
nodes (Read-only)
Default: public
www.ad-net.com.tw
- 23-