E1 Senior Management - AD-net Technology AN-TDM-IP-1E1/2E1-A User Manual

Manuel de l'usager du Mux IP vers 2xE1
5.5.2

E1 Senior Management

Fig 5.5-3 TTL/TOS configuration of E1 channel Management
Parameters
Service
Name
Enable
Timing
Mode
E1
Channel
Jitter
Buffer
Destinati
on IP
UDP Port
- 22 -
AD-net Technology. CO LTD
Fig 5.5-2 E1 channel senior Management
Table 5.5-1
E1 Management parameters
Selections
E1 service name
Enable this E1 channel. Default: disable
Adaptive mode:E1 timing from remote E1
Adaptive
stream
Loop back mode:E1 timing comes from local
Loopback
E1 stream
Local mode: E1 timing comes from local
Local
equipment crystal oscillator
Jitter absorption buffer: worked with the link
with bigger jitter, used to buffer the receiving
packets.
4~256ms
Coming packets buffer to eliminate jitter.
Range：4~256ms
Default: 16ms
Remote end IP address；4 E1 line IP addresses
can be set separately
Default 192.168.1.3
UDP Source Port: Effective range:1024~65535
Source
UDP
Destination
range:1024~65535
www.ad-net.com.tw
www.hypercable.fr
Explanations
Destination Port: Effective