Legs - Colorado time systems Pro Pace Clock User Manual

Introduction

Legs

Data cable
connections
AC Power
connection
4
ting on the mode switch, as described in the Water Polo chapter, be-
ginning on page 7.
The pace clock includes legs. If you would like to use the legs, attach
them with the hardware included to the threaded mounting holes in
the bottom of the clock.
Side panel
On the right end panel, there are four data cable connectors and a
power receptacle. The upper two data cable connections are round,
4-pin connectors for RS-485; the lower two are quarter-inch phono
connectors for RS-232.
The power receptacle accepts a standard power cord for 110 VAC. If
220 VAC is required, the power supply can be modified at the fac-
tory. Modified units are labeled accordingly.