Swimming; Lane Times; Event/Heat; Training Pace Clock - Colorado time systems Pro Pace Clock User Manual

Scoreboard Modes

Swimming

Lane Times

Event/Heat

Training Pace Clock

Lane Times

Diving

Dive Number and
Position
20
Modes 1 - 10
Connect the clock(s) to a CTS timer running Swimming software.
When a clock is switched to one of the modes 1 through 10, it will
briefly display the mode number (01 through 0A). It will then dis-
play the minutes and seconds for the corresponding lane, either run-
ning time or split time.
Mode 11
Connect the clock(s) to a CTS timer running Swimming software.
When a clock is switched to mode 11 it will briefly display E: H for
Event/Heat. It will then display the current event number on the left
two digits and the current heat number on the right two digits.
Modes 1 - 10
Connect the clock(s) to a CTS timer running Pace Clock software, or
to a Pace Clock Controller. When a clock is switched to one of the
modes 1 through 10, it will briefly display the mode number (01
through 0A). It will then display the time for the current lane.
Mode 13
Connect the clock(s) to a CTS timer running Diving software. When
a clock is switched to mode 13, it will briefly display
Number. It will then display the dive number and position for the
current diver. If the dive number is 4 characters long (e.g., 101B or
403C), the display will show the entire dive number. If the dive
number is 5 characters long (e.g., 5132D or 6142B), the display will
alternate between the first four characters and the final character on a
half second basis.
for Dive
dn