Chapter 4 Mac-Based Vlan Commands; Mac-Vlan Mac-Address; Mac-Vlan - TP-Link JetStream TL-SL5428E Cli Reference Manual

Chapter 4
MAC VLAN (Virtual Local Area Network) is the way to classify the VLANs based on MAC Address.
A MAC address is relative to a single VLAN ID. The untagged packets and the priority-tagged
packets coming from the MAC address will be tagged with this VLAN ID.

mac-vlan mac-address

Description
The mac-vlan mac-address command is used to create a MAC-based VLAN
entry. To delete a MAC-based VLAN entry, please use the no mac-vlan
mac-address command.
Syntax
mac-vlan mac-address mac-addr vlan vlan-id [description descript]
no mac-vlan mac-address mac-addr
Parameter
mac-addr —— MAC address, in the format of XX:XX:XX:XX:XX:XX.
vlan-id —— Specify IEEE 802.1Q VLAN ID, ranging from 1 to 4094.
descript —— Give a description to the MAC address for identification, which
contains 8 characters at most.
Command Mode
Global Configuration Mode
Example
Create VLAN 2, named "TP", and the MAC address is 00:11:11:01:01:12:
TL-SL5428E(config)#mac-vlan
description TP

mac-vlan

Description
The mac-vlan command is used to enable a port for the MAC-based VLAN
TL-SL5428E
MAC-based VLAN Commands
JetStream L2 Managed Switch CLI Guide
mac-address 00:11:11:01:01:12
25
vlan 2