Table of Contents
Advertisement
Windows NT 4.0
1
2
3
Macintosh
1
2
3
4
Sending a copy job to an output bin that is different from the default
HP LaserJet 9040mfp/9050mfp/9500mfp
1
2
3
The output bin options that are available for copy jobs differ depending on the operation mode.
See the following table for more information.
Operational mode
Mailbox mode
●
●
●
16 2 Configuring the MBM for your work environment
Open a document, and then click Print on the File menu.
Click Setup or Properties. (The options might be different for your program.)
Perform one of the following actions:
If you are using a PCL printer driver
• On the Output tab, select the appropriate output bin, and then click OK.
If you are using a PS printer driver
• Click the Advanced tab. Under Document Options, click Printer Features. Select the
appropriate output bin from the Output Bin list.
On the File menu, click Print.
Select the Finishing panel.
In the Output Destination list, select 8-Bin Mailbox.
In the Mailbox Options list, select the appropriate output bin, and then click Print.
Touch the copy icon on the control-panel display.
Touch COPY SETTINGS, and then touch the Advanced tab.
Select the output bin for your copy job.
Stacker mode
Job Separator mode
Sorter/Collator mode
Copy bin is enabled
●
UPPER BIN
●
*BIN 1
●
BIN 2
●
BIN 3
●
BIN 4
●
BIN 5
●
BIN 6
●
BIN 7
●
BIN 8
●
UPPER BIN (STRAIGHT
PATH)
●
*BIN 1
●
BINS 2-8 (CORRECT
ORDER)
Copy bin is disabled
Not applicable (the
face-down bin 1 is always
used for copy jobs when the
Mailbox mode is set)
●
UPPER BIN (STRAIGHT
PATH)
●
*BINs 1-8 (CORRECT
ORDER)
ENWW
Advertisement
Table of Contents
