Silvercrest DP-5300 Series User Manual And Service Information page 26

Table of Contents

Enlarged version

Bass-Management:

If you have connected your DVD player to an AV

receiver or active speakers via the analogue 5.1

outputs (3), you can enable your subwoofer here.

Off : No subwoofer.

On: The subwoofer will be used.

Front Speakers:

Here you can set whether the front left and right

speaker will receive the full frequency range or if the

bass frequencies will be skipped, for example, when

using a subwoofer.

Large: The front speakers will receive the full

frequency range, there is no subwoofer.

Small: The lower frequencies will be skipped, the

subwoofer will play them back instead.

Centre Speakers:

Here you set if there is any centre speaker at the

front in the middle (between the left and right

speakers) and what frequency range is to be used to

feed it.

Large: The centre speaker will receive the full

frequency range, there is no subwoofer.

Small: The lower frequencies will be skipped, the

subwoofer will play them back instead.

None: There is no centre speaker installed, the

signals will be sent to the front left and right

speakers.

Surround Speakers:

Here you set if there are any back effect speakers

and what frequency range is to be used to feed them.

Large: The surround speakers will receive the full

frequency range, there is no subwoofer.

Small: The lower frequencies will be skipped, the

subwoofer will play them back instead.

None: There are no surround speakers installed, the

signals will be sent to the front left and right

speakers.

Table of Contents