Programming A Page Or Call Name - Motorola XTL 1500 User Manual

Trunking Features

Programming a Page or Call Name

This feature lets you change the ID names assigned to the call lists
used by the trunked Private Conversation and Call Alert features, as
well as the phone names used by the phone feature.
1 Press the m button below PROG..
2 Do one of the following:
• Press the m button below PHON to
access the phone list,
OR
• Press the m button below CALL or
PAGE to access the call list.
The display shows the first member's
name above either the phone number or
above the radio ID number.
The display shows the programming-
mode annunciator (a flashing I) until
you exit the programming list mode.
3 Do one of the following:
• Rotate the Mode Knob to view other list members.
OR
• Use the keypad to enter a member's position number (any
preprogrammed location from 1 to 100) to go directly to that
member.
4 Press the NAME softkey, to enter the name edit mode.
5 Erase the old name by pressing < to delete each character.
58
PROG PAGE
CALL SCAN VIEW