Basic Radio Operation
Transmitting on Trunked Systems
Follow these steps to transmit on a trunked system:
1
Select a desired zone and mode (see page 17).
until a secure voice channel is available before you can
transmit.
When you hear a transmission, use the Volume Knob to adjust
the volume to a comfortable listening level if necessary.
2
Press and hold the PTT button to transmit.
Speak clearly into the microphone.
The red LED lights steadily when the radio is transmitting.
3
Release the PTT button to receive.
Notes: If you hear a busy ("bah-bah-bah-bah") signal, release the
PTT button. You hear a "di-di-dit" ("call-back") tone. You
have three seconds to transmit before you hear another
busy signal.
If transmission is not possible for some reason, you hear a
continuous, low-pitched ("talk prohibit") tone. Your radio may
be out of range.
20
Note:If no secure voice modes
are available for a transmission,
the display shows NO SEC.
You must switch to a clear mode or wait