Trunking Functions; Sending A Call Alert Page; Receiving A Call Alert; Reprogram Request - Motorola MCS 2000 User Manual

Trunking Functions

Sending a Call Alert Page

Select the menu PAGE as previously described, then
use the mode selector (D) to display the desired ID.
Press the PTT (F) the select button (13) to send the
Call Alert Page.
The call alert page acknowledgement tone is heard if
the called radio receives the call alert page. If the page
is not received the display will show
NO ACK
Exit the function to return to the home display.

Receiving a Call Alert

When a call alert is received, the call alert received
tone is heard, the green LED and the
in the display until the Call Alert is acknowledged by
pressing the PTT (F) or pressing and releasing the
monitor button (2).
Status/Message
Operated as previously described under Conven-
tional Functions.
MCS 2000 Model I

Reprogram Request

If dynamic regrouping is programmed into your radio,
the reprogram request function may be selected
through a menu. A reprogram request will send a mes-
sage to the console operator requesting that the oper-
ator assigns the radio to a new talkgroup. See your
system administrator for further details.

One Touch Button Functions

If this optional feature is programmed in your radio, a
button may be dedicated to sending a pre-pro-
grammed status, message, call alert or dialing a pre-
programmed phone number. See your system admin-
istrator for further details.

Out of Range

If this optional function is programmed into your radio,
it will indicate when you have left your radio coverage
icon flash
area. The display will alternate between
and the current mode and the out of range tone will
sound.
NO SYS
68P81083C48-B
page 15