Turning Scan On Or Off; Deleting Nuisance Modes - Motorola XTL 1500 User Manual

Common Radio Features

Turning Scan On or Off

1 Press m below SCAN.
OR
Alternatively press the preprogrammed
Scan button.
2 The display shows SCAN ON if
previously SCAN OFF was selected
and the scan indicator is turned on.
OR
3 The display shows SCAN OFF if previously
SCAN ON was selected and the scan
indicator is turned off

Deleting Nuisance Modes

During scanning, you can temporarily delete modes you do not want to
hear. This feature must be preprogrammed by your system manager.
Follow these steps to delete a nuisance mode:
1 When the radio is locked onto the mode you want to delete,
Press the preprogrammed Nuisance Delete button.
OR
Press the NUIS softkey to delete the mode.
A valid key-press chirp tone sounds. The mode is deleted and
the radio continues to scan the remaining modes.
Note: You cannot delete priority modes and the designated
transmit channel.
2 To resume scanning the deleted mode, press scan off and then
back on again.
OR
Turn power off and then back on again.
32
SCAN