Basic Radio Operation
Monitoring Conventional Modes
To monitor conventional modes, do the following:
1
Press the preprogrammed Monitor button.
2
The display shows MON ON and the carrier
squelch annunciator is turned on indicating
that the squelch circuit has been opened,
allowing you to monitor all of the traffic on
the channel.
To cancel monitoring:
1
Press the preprogrammed Monitor button
2
The display shows MON OFF and the
carrier squelch annunciator is turned off.
Note: If radio is in conventional mode, with Carrier Squelch
selected, the carrier squelch annunciator will remain on the
display.
16