Page 1
Model A10-703E For questions regarding performance, assembly, operation, parts, or returns, contact the experts at MAGMA by calling (562) 627-0500 7:00 a.m. - 5:00 p.m. Pacific Time Monday thru Friday or e-mail us at mail@MagmaProducts.com Read these instructions carefully before use. Familiarize yourself with the appliance before...
19. Do not clean this product with a water spray or the like, unless the heat element and the temperature-control cord all are removed. 20. Use only with the temperature-control cord - Manufacturer: Kosway Electrical Ltd, type A10-703E. Magma Part No. 10-142. 21. Use only with the Heater element - type 703E. Magma Part No. 10-141.
Page 3
MOUNT HARDWARE Fasteners are supplied for Single Mount grill mounting options. See Magma Website for mount selection: www.MagmaProducts.com Single mount through-bolt applications 4 Carriage bolts, washers & lock nuts. Note: Place washers on carriage bolts as shown. Carriage bolt, washer & lock nut See Magma Website for replacement part numbers.
OPERATING PROCEDURES PRACTICAL HINTS: Before using the grill be sure that: • Grill is secure and properly mounted • Internal components and grease tray are clean and correctly positioned • Lid Lock has been set not to engage by opening lid and turning lock to the locked position Instructions: •...
DISASSEMBLY & RE-ASSEMBLY Temperature Control Temperature Control Receiver 1. Turn Temperature Control to OFF. 5. Remove grill grates. 2. Unplug cord from power source. 3. Press in Safety Lock on the side of the Control. 4. Slide Temperature Control out from its Receiver.
“amber” color of grill exterior and internal components is not a failure of the stainless steel and will not affect products operation. When this happens, we recommend using “Magma Magic” Grill Restorer to remove the “amber” color and return grill to its original luster. However, prolonged exposure to extreme high heat will cause chromium and nickel to “burn out”...
TROUBLE SHOOTING GUIDE Problem Possible Cause Possible Solution Electric Grill will Power Cord not properly Check that the Power Cord is fully not turn on engaged inserted through the temperature Control Receiver and into the Heat Element Check that the Power Cord is fully inserted into GFI outlet.
LIMITED WARRANTY Magma Products, Inc. guarantees this product to be free from defects in materials or workmanship to the original consumer. This guarantee is for the periods herein specified when used under normal and reasonable conditions, one (l) year from the date of original purchase. This warranty does not include the cost of property damage or any inconvenience due to the failure of the product.
Need help?
Do you have a question about the Cabo A10-703E and is the answer not in the manual?
Questions and answers